The Economics tab in the [1] calculates the relationship between Customer Lifetime Value (CLTV) and Customer Acquisition Cost (CAC) for each client account. It is one of the most powerful features in the platform for demonstrating ROI and defending ad spend decisions in client conversations.
The core output is a ratio: how many dollars of lifetime customer value are generated for every dollar spent acquiring that customer.
Customer Lifetime Value is derived from three inputs set in account settings:
Example (Bluepoint ATM):
- $833/month × 36-month average retention × 70% retention rate ≈ $21,000 CLTV
Customer Acquisition Cost is built up from:
These inputs are combined to produce a fully-loaded CAC figure.
Example (Bluepoint ATM):
- $822 ad spend ÷ 6 conversions = $137 cost per tracked conversion
- Adjusted for 10% lead-to-customer rate → ~$1,800 fully-loaded CAC
CLTV ÷ CAC = Return Multiple
$21,000 ÷ $1,800 = 11.2:1
The platform also calculates payback period — how many months until the acquisition cost is recovered from customer revenue. In the Bluepoint example, this was approximately 3 months.
Below the core CLTV/CAC figures, the Economics tab includes a sensitivity analysis showing what happens to profit if ad spend increases:
| Monthly Spend | Projected Profit |
|---|---|
| $822 (current) | ~$8,000 |
| $1,000 | ~$11,000 |
| $1,200 | higher |
This is useful for budget expansion conversations — showing clients the marginal return on incremental spend rather than arguing about absolute cost.
The Economics tab is the go-to resource when clients raise concerns about acquisition costs or question the value of ad spend.
"When they start complaining about customer acquisition costs, you go to this Economics tab and say: your Customer Lifetime Value is $21,000. What are you worried about?" — Mark Hope
Workflow:
1. Navigate to the client in X-Ray
2. Open the Economics tab
3. Confirm CLTV inputs are current (settings → client profile)
4. Use the ratio and payback period as the anchor for the conversation
5. Pull up the sensitivity analysis to show upside from increased spend
CLTV inputs are set manually in client settings. They should be reviewed and updated:
- At onboarding
- When a client's pricing or contract structure changes
- When churn data becomes available from HubSpot or CRM
The lead-to-customer rate is an estimate that should be refined over time as actual close rate data accumulates.